| 71813ACDGA/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | Basic Static Radial Load Rating Co:375000 N; d:260.000 mm; B:65.00 mm; Accessories:One Seal; Sealed Speed Rating n3:940 rpm; Oil Speed Rating Open/Shielded n2:1800 rpm; Grease Speed Rating Open/Shielded n1:1500 rpm; Basic Dynamic Radial Load Rating C:291000 N; D:400.0000 mm; Fillet Radius ra:3.00 mm; |
| N1011KTNHA/SP SKF Super Precision,Super Precision Bearings,Cylindrical Roller Bearings,Single Row N 10 Series | Calculation factor f:1.12; Static axial stiffness, preload class C:323 N/µm; Preload class A GA:240 N; Da max.:89 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class B:243 N/µm; Reference grease quantity Gref:5.4 cm³; Ball diameter Dw:11.112 mm; D:95 mm; r3,4 min.:0.6 mm; Calculation factor fHC:1.02; Calculation factor (single, tandem) Y2:0.87; |
| 7010ACD/P4ADGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | RG:3/4 NPT; Ca:89.789 mm; P120°:133 kN; Da:289.999 mm; Max. speed for Taconite seal:440 r/min; A1:158.75 mm; ba:69.85 mm; H:338.137 mm; Housing:SSAFS 038 KA; End plug (suffix Y):EPR 21; L:558.8 mm; Cap bolt:7/8-9 UNC; P60°:345 kN; Taconite seal:TER 153; Cap bolt, SAE grade:8; h:47.625 mm; A2:288.925 mm; P180°:145 kN; Stabilizing ring:2 x 38151-38; P90°:207 kN; |
| N1011KTN/SP SKF Super Precision,Super Precision Bearings,Cylindrical Roller Bearings,Single Row N 10 Series | B:33.00 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Basic Dynamic Radial Load Rating C:102000 N; Grease Speed Rating Open/Shielded n1:3900 rpm; Accessories:Two Shields & Snap-R; D:140.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:90000 N; d:65.000 mm; |
| 71911CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | Ca:73.812 mm; Initial grease fill:382.73 g; Stabilizing ring:SR-26-0; End plug (suffix Y):EPR 15; A2:203.2 mm; P60°:308 kN; RG:1/2 NPT; Bearing limiting speed:3600 r/min; Pa:24.9 kN; Housing:SSAFS 526; h:60.325 mm; H1:152.4 mm; Eye bolt:2 x 3/8-16 UNC; R2:36.513 mm; P90°:185 kN; L:466.725 mm; P180°:151 kN; P120°:125 kN; da:114.3 mm; R1:79.375 mm; |
| N1011KTNHA/HC5SP SKF Super Precision,Super Precision Bearings,Cylindrical Roller Bearings,Single Row N 10 Series | Mass angle ring:3.62 kg; r3,4 min.:4 mm; B1:16 mm; d1 ≈:329.05 mm; B2:31.5 mm; d:280 mm; |
| 7011CEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Limiting speed:6700 r/min; Basic dynamic load rating C:50.1 kN; Ew:76 mm; Mass needle roller and cage assembly:0.11 kg; U:30 mm; Fw:70 mm; Fatigue load limit Pu:17.6 kN; Basic static load rating C0:140 kN; Reference speed:6000 r/min; |
| 7010CD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | H:187.325 mm; Da:150 mm; L:330.2 mm; Stabilizing ring:SR-17-14; A1:88.9 mm; P120°:31.6 kN; P90°:49.8 kN; h:34.925 mm; Taconite seal (dc shaft position):TER 63; J max.:279.4 mm; P150°:28.5 kN; P180°:33.8 kN; Housing:FSAFS 217; J min.:250.825 mm; J1:53.975 mm; db:100.013 mm; RG:3/8 NPT; End plug (suffix Y):EPR 9; Cap bolt recommended tightening torque:298.3 N·m; Ca:45.796 mm; |
| 7010ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | J1:117.475 mm; Pa:46.3 kN; J max.:600.075 mm; A1:180.975 mm; P120°:196 kN; Stabilizing ring:SR-36-30; Housing:SAFS 536; da:161.925 mm; Da:319.999 mm; P90°:320 kN; P150°:173 kN; h:60.325 mm; RG:3/4 NPT; Cap bolt, SAE grade:8; Max. speed for PosiTrac Plus seal:875 r/min; Ca:95.809 mm; J min.:530.225 mm; Initial grease fill:1304.1 g; L:679.45 mm; Cap bolt recommended tightening torque:1220 N·m; |
| 71911ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | RG:1/4-28 UNF; Housing material:Cast iron; N4:2 mm; B:45 mm; Recommended diameter for attachment bolts, mm G:16 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; A5:29.5 mm; L:127 mm; s1:32.5 mm; N:18 mm; Recommended tightening torque for grub screw:16.5 N·m; B4:9 mm; Limiting speed:3600 r/min; Fatigue load limit Pu:1.25 kN; A:47 mm; J7:18 mm; d:50.8 mm; R1:31.5 mm; |