| 71811ACDGB/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | with cylindrical bore:1 400 min-1; Oil:83.890 kN; Pu:564 kN; D:215 mm; with tapered bore:1 700 min-1; d:120 mm; Grease:803 kN; Static (Cor):8.3 mm; B:76 mm; Dynamic (Cr):4.5 mm; rs (min):2.1 mm; |
| NN3011TN/SP SKF Super Precision,Super Precision Bearings,Cylindrical Roller Bearings,Double Row NN 30 Series | P180°:49.8 kN; Pa:32 kN; Labyrinth ring (dc shaft position):LOR 46; RG:3/8 NPT; L:349.25 mm; R1:60.325 mm; Cap bolt recommended tightening torque:298.3 N·m; J min.:263.525 mm; PG:1/8 NPT; Max. speed for PosiTrac Plus seal:1450 r/min; db:87.313 mm; Appropriate attachment bolt size G:0.75 in; P60°:121 kN; Mass pillow block:20 kg; da:75 mm; Labyrinth ring (db shaft position):LOR 79; ba:35.719 mm; |
| BSA208CGB SKF Brands,All Brands,SKF,Super Precision Angular Contact Thrust,BSA | d:440 mm; rs (min):6 mm; Grease:10640 kN; B:226 mm; Pu:5600 kN; with tapered bore:530 min-1; Static (Cor):22.3 mm; with cylindrical bore:430 min-1; D:720 mm; Dynamic (Cr):12 mm; Oil:765.770 kN; |
| S7010CEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Fatigue load limit Pu:0.28 kN; Basic static load rating C0:6.55 kN; L:86 mm; N:12.3 mm; Mass bearing unit:0.31 kg; Housing material:Composite; J:63.5 mm; Recommended tightening torque for grub screw:4 N·m; Basic dynamic load rating C:12.7 kN; A5:18.5 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:30 mm; d:20 mm; s1:26.6 mm; Db:59 mm; Da:68.3 mm; B1:43.7 mm; A1:15 mm; |
| 7011ACEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | d:220 mm; Da max.:385 mm; da min.:239 mm; Basic dynamic load rating C:1830 kN; Calculation factor e:0.3; B:108 mm; Calculation factor kr:0.3; D1 ≈:349 mm; s max.:8 mm; E:366 mm; rb max.:3 mm; d1 ≈:277 mm; r3,4 min.:4 mm; Fatigue load limit Pu:255 kN; ra max.:3 mm; Basic static load rating C0:2750 kN; r1,2 min.:4 mm; Calculation factor Y:0.4; Limiting speed:850 r/min; Reference speed:700 r/min; |
| 71909CD/P4AQBCA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | B1:202 mm; d:460 mm; Mass withdrawal sleeve:34 kg; A:9 mm; B2:213 mm; G1:37 mm; G:Tr 480x5; G2:G 1/4; Hydraulic nut:HMV 96 E; d1:440 mm; |
| 7009CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Sealed Speed Rating n3:8000 rpm; Oil Speed Rating Open/Shielded n2:16000 rpm; Accessories:Two Shields; B:7.00 mm; D:47.0000 mm; Basic Static Radial Load Rating Co:3800 N; Grease Speed Rating Open/Shielded n1:13000 rpm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:4750 N; d:35.000 mm; |
| 7013ACEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | GN:1/4-28 SAE-LT; RG:1/4-28 UNF; Thread grub screw G2:1/4-28 UNF; J:70 mm; J6:83 mm; Db1:65 mm; J7:19 mm; SWN:7 mm; Mass bearing unit:0.73 kg; Recommended diameter for attachment bolts, inch G:0.375 in; R1:21 mm; A:30 mm; DN:6.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; N4:4 mm; A3:3.2 mm; Bearing:YAR 205-013-2F; d:20.638 mm; Da:74.6 mm; Basic dynamic load rating C:14 kN; |
| 7209CD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,15 Degree Contact Angle | da min.:1102 mm; D1 ≈:1006 mm; Minimum load factor A:440; d:1000 mm; H:109 mm; Mass bearing (including seat washer where applicable):210 kg; D:1180 mm; ra max.:4 mm; r1,2 min.:5 mm; Basic dynamic load rating C:923 kN; Basic static load rating C0:9150 kN; Limiting speed:430 r/min; Da max.:1078 mm; d1 ≈:1174 mm; Fatigue load limit Pu:102 kN; Reference speed:320 r/min; |
| 7212ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Fillet Radius ra:1.50 mm; B:36.50 mm; Oil Speed Rating n2:6700 rpm; D:90.0000 mm; d:40.000 mm; Grease Speed Rating n1:5000 rpm; Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:65500 N; Basic Dynamic Radial Load Rating C:67100 N; Sealed Speed Rating n3:5000 rpm; |